Bombard parts

Honwave drain bung 94109-ZV5-T00HE also fitted to Waveline Drain bung / plug for Honda Honwave Inflatables. Also fitted to Waveline inflatables 35mm Diameter drain hole 47mm hole in transom Overall...

Chromed Brass Drain Plug The Rib and inflatable boat bungs are available in 22mm, and 32mm Drain plug in chromed brass material, with micrometric regolation. Very strong 

Zodiac oar lock upgrade kit part number Z67506 This kit upgrades the older style of rowlock block to the new "Safe-Clic" style. The earlier rowlock, (push in and turn 180 degrees to lock) is now...

Zodiac Delrin Valve Diaphragm Z2195 A replacement diaphragm for fit the Zodiac / Bombard Delrin valve as fitted to many Bombard and Zodiac inflatable dinghies. Zodiac part number Z2195 Photo of...

PVC material for Ribs and inflatable boats. We stock PVC fabric in two size options and a large choice of colours.   Sizes available are:  1400x250mm 1400x1000mm   Our PVC fabric can be used on...

Expanding drain bungs - transom bung Our Rib and inflatable boat bungs are available in 22mm, 34mm and 40mm. The expanding drain bungs are fitted to many Ribs and inflatable boats including Avon,...

Dinghy transom drain Dinghy transom drain bung fitting with one way valve. To fit transom hole of 40mm.

Zodiac transom drain bung fitting  Zodiac transom drain bung fitting with open and close lever. To fit transom hole of 39mm. Zodiac part number Z61083  

Zodiac Delrin Valve Cap Z2846 Screw cap for the Zodiac & Bombard Delrin screw-in valve. The Delrin valve is commonly used on Zodiac and Bombard inflatable dinghies as well as Avon floors and...

Zodiac Delrin Valve & Cap A replacement Zodiac / Bombard Delrin Valve & cap as fitted to many Bombard and Zodiac inflatable dinghies. The Delrin valve with cap, screws into the plastic housing...

Zodiac valve core insert Replacement Zodiac valve core for Zodiac recessed inflation valve. This Zodiac part is a common replacement part for leaking Zodiac inflation valves. The valve core can be...

Rib glue for PVC Ribs and inflatable boats PVC glue adhesive 2 part glue for PVC Ribs, inflatable boats and liferafts Rib Shop two part PVC glue is produced to the highest quality and will give a...

MEK - solvent cleaner / primer For use in preparing areas ready for gluing and removing excess glue. Our MEK PVC thinner solvent should be used to prepare PVC material prior to applying glue or...