Tornado spare parts

Valve adaptor for C7 and D7 Rib inflation valves. Pump hose adaptor with bayonet fitting one end and Leafield Marine C7/D7 fitting the other end.  Due to the variety of bayonet hose types available the adaptor comes with a seal and 2 spacer...

C7/D7 Rib inflation valve cap Replacement valve cap for Leafield C7 and D7 valves. Available in Black or Grey. 

Valve adaptor for C7 and D7 Rib inflation valves. Leafield C7/D7 valve to pump adaptor.  This Leafield valve adaptor will fit pump hoses of 16mm or 20mm and allows the pump hose to be securely fitted to the Leafield C7 or D7 valves...

A7 / B7 Inflation Valve Service Kit Easy to fit repair kit for A7 and B7 inflation valves. The A7 and B7 valves were fitted to many Ribs and inflatables including Avon, Ribtec, Ribcraft, Humber, Cobra, Revenger.  These started to be replaced with...

C7 Rib Inflation Valve Leafield C7 inflation valves are the standard valve fitted to most UK built Ribs built from 1999 onwards. Before you replace the C7 valve, test the centre of the valve using soapy water and if the air is leaking from this area...

Valve spanner for A6 or B7 inflation valves   This spanner is required when replacing, servicing or cleaning A6 or B7 inflation valves.

Valve spanner for use with D7, C7 and A6 inflation valves.   When you need to repair, clean or replace the D7, C7 or A6 inflation valve, this spanner allows for easy removal and re-fitting of the valve.